Using eToken Pro USB Keys to Store WM Keeper Light Personal Certificates

In order to store the WM Keeper Light personal certificate on the eToken Pro USB keys you should do the following:

1. Install eToken RTE and eToken Utilities software. You can download this software from the developers's site.
   
   
2. Regiter at WM Keeper Light and receive a personal certificate at www.wmcert.com.
   
   
3. If the certificate was installed into the browser certificate storage after registering than in order to transfer in to the eToken key go to the clause 5.
   
   
4. If the certificate is stored in the *.pfx or *.p12 file after the registration or you already have the personal certificate, than you should import the certificate into the browser certificate storage and go to the next clause.
   
   
5. Insert eToken Pro key into your coputer's USB port.
   
   
6. Start the "eToken Certificate Converter" utility (Start\Programs\eToken\Utilities\eToken Certificate Converter).
   
   
   
   
7. In the window "Hard drive and other physical stores" choose the certificate with your WM ID.
   
   
8. Check the point "Delete original certificate and keys".
   
   
9. Click the button "Import to eToken".
   
   
10. Input the password to the eToken key and press "Ok".
    
    
    
    

    After the convertation is complete the certificate belonging to your WM-ID will be transferred to the eToken key and will be shown in the window "eToken physical store".

    
    
    
    
    
11. Close "eToken Certificate Converter".
    
    

Working with WM Keeper Light if the personal certificate is stored on the eToken Pro USB keys:

1. Insert the eToken key into your computer's USB port.
   
   
2. In order to start the WM Keeper Light server application visit the site https://light.wmtransfer.com.
   
   
3. In the certificate request window choose your WM ID and click Ok.
   

If you have any problems consult Technical support on eToken.